Wisebond’s Pre-Tinted Water-Based Flake Floor Epoxy is specifically designed and an easy roll-on epoxy base-coat to accept epoxy floor flakes. The product comes in 3 colors including White, Antique White, and Dove Gray. Coverage ranges from 200-250 sq. ft. with a 3/8” nap 12–18-inch paint roller.
WiseBond’s Pre-Tinted Water-Based Flake Floor Epoxy for concrete flake floors is a 2 part, low VOC floor base coating that is: durable color layer for both new and old interior concrete floors, primer coat, and binder for epoxy flakes. Our high loading of pigment achieves the preferred substrate to hide and tint uniformly. It generates the premier balance of strength, flexibility, and chemical resistance, all in a low odor, low VOC formulation.
Unlike nearly all floor epoxies, Wisebond’s Pre-Tinted Water-Based Flake Floor Epoxy for concrete garage floors and mancaves has remarkable properties related to moisture control.
Wisebond’s Pre-Tinted Water-Based Flake Floor Epoxy system can create amazingly inviting areas that are vastly different than conventional painted concrete sealers available on the market today. The tints used are pre-mixed and far more durable and UV resistant than adding a tint the same day as application. With our epoxy tint pigments, your finished colored water-based epoxy coating will last much longer than most concrete base-coats ever would, with the color staying much more vibrant over a long period of exposure.
Coverage: 200-250 sq, ft, per gallon catalyzed product (varies widely based on application method)
VOC Rating: 175 g/L
Solids Content: 52%
Shelf Life: 1 year in original unopened container
Mixing Ratio: 4 parts A to 1 part B
Pot Life: 1 hour
Ready for recoat: dry to the touch (4-18 hours)
Light Duty Use: 16-30 hours
Full Cure: 5-14 days
Appearance (cured): Gloss sheen
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Fair
Odor: Epoxy
Application Temperature: 50 - 90 degrees Fahrenheit
MEK: not recommended
Xylene: 2 hours splash spill
Gasoline: 2 hours splash spill
10% Sodium Hydroxide: 8 hours splash spill
50% Sodium Hydroxide: 2 hour splash spill
Acetic Acid 5%: 2 hours splash spill
10% Sulfuric Acid: 2 hours splash spill
70% Sulfuric Acid: not recommended
10% Hydrochloric Acid: 2 hours splash spill
20% Nitric Acid: not recommended
Ethylene Glycol: 8 hours splash spill
Our Pre-Tinted Water-Based Flake Floor Epoxy is one of the easiest to apply and use:
Step 1: Any concrete surface that is about to be overlayed with epoxy flakes needs to be completely cured, clean and free of all contaminants.
Step 2: Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and relative humidity to stay below 75%.
Step 3: Pour 1 part "B" into 4 parts "A". Part A container is short-filled to accept all of Part B. Mix A and B mechanically for a minimum of 3 minutes scraping the sides frequently.
Step 4: If applicable, first with a paintbrush or small handheld roller, apply floor epoxy to the cove joint concrete outer side walls of the room.
Step 5: While wearing spiked shoes, pour mixed epoxy onto the floor in 4”-6” wide ribbons running perpendicular across the floor. (1-gallon of base-coat epoxy will cover 200-250 sq. ft.) You have +/- 60 minutes before the epoxy will start to set in the bucket, the quicker you pour the epoxy on the floor, the longer working time you have.
- After the epoxy is poured out, use a 3/8” nap 12–18-inch paint roller parallel to the poured ribbons to push the epoxy puddle uniformly covering the floor.
- Roll out over workable area, making sure to maintain wet edges and backroll the entire surface just like you would roll floor paint working your way out of the room.
NOTE: Be cautious to not leave roller lines or ridges which could show through as high points in the flakes.
Step 6: Apply epoxy floor flakes and your choice of a polyurethane top-coat.
PART A - CALIFORNIA PROPOSITION 65: This product contains no chemical(s) known to the State of California to be Carcinogenic. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.
PART B - CALIFORNIA PROPOSITION 65: This product contains no chemical(s) known to the State of California to be Carcinogenic. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.
© 2024 - WiseBond®, A product of DeckWise®, The Ipe Clip® Fastener Company