WiseBond’s Concrete Cleaner Degreaser & Etcher is a concentrated concrete cleaner, degreaser, and etcher which is a safe alternative to muriatic acid. Manufactured for the solution to go into the pores of the concrete and to bubble the impurities out to be rinsed away.
This formula quickly dissolves mortar, scale, rust, algae, stains, and mineral deposits such as efflorescence. This product is also a stronger cleaner than citric acid and a safe alternative to muriatic acid, as it contains no toxic heavy metals or ozone-depleting solvents.
Concrete Cleaner Degreaser & Etcher is an eco-friendly 3-in-1 cement cleaner. This product brings a powerful, degreaser, and etcher which is a safe alternative to muriatic acid. The cleaner works by the solution going into the pores of the concrete and bubbling the impurities out to and rinsed away.
Even though this is a powerful concrete cleaner, it has been designed not to hurt the landscaping. The cleaner can aid in removing dirt, efflorescence, mold, mineral deposits, rust, and works well to lighten and remove oil and gasoline stains.
In addition, the combination of an etcher makes it an ideal application before applying epoxy coatings. The etching process will open up the pores allowing for an increase in adhesion and absorption of epoxy.
Concrete Cleaner Degreaser & Etcher in a dilution of 2-1 to 4-1 (part water to part concentrate) will help open the pores of the surface increase the penetration and adhesion of our water-based epoxy. It can also remove release agents that the surface absorbed during the curing process, ensuring that the epoxy system can be absorbed and create the correct bond.
With all of the applications that this cleaner can clean, the days of dirty concrete could disappear! Whether you are an experienced contractor or a first-time DIY user, Concrete Cleaner Degreaser & Etcher is the strongest, easiest, and most efficient surface cleaner in the market due to its simple dilution rates, no need for neutralization, and its ability to be rinsed with clean water, unlike other cleaners’ sealers cleaner.
Concrete Cleaner Degreaser & Etcher once diluted will not harm plants and can be disposed of down a drain.
One of the easiest cleaning and profiling agents available, Concrete Cleaner Degreaser & Etcher was formulated to be a product anyone can use.
Step 1: Depending on the surface you intend to clean, dilute cleaner with water to 2:1 mix ratio. 2 parts water to 1 part cleaner.
Step 2: Dampen concrete with water from spray mist of pump-up sprayer or garden hose trigger nozzle.
Step 3: Apply evenly 2:1 diluted product across the surface of the concrete. Best results are achieved by spraying from a plastic pump-up sprayer. Being careful to maintain a wet surface.
Step 4: While cement surface is still wet, work cleaner into the surface using a stiff bristle broom or brush.
Step 5: Before concrete cleaner can dry, rinse the concrete surface with hose or power washer and make sure all residue has been removed.
NOTE: For best results apply in temperatures above freezing and below 90°F (32°C).
NOTE: Stronger dilution rates may be required for an adequate profile. Some surface preparation may require other measures that should be evaluated (e.g. grinding, shot blasting).
CALIFORNIA PROPOSITION 65: This product contains a chemical(s) known to the state of California to cause cancer, birth defects or reproductive harm. FOR MORE INFORMATION GO TO: WWW.P65WARNINGS.CA.GOV.
© 2024 - WiseBond®, A product of DeckWise®, The Ipe Clip® Fastener Company