The WiseBond® Deep Pour Epoxy 1.5-Gal Beginners Kit is the ultimate must-have for epoxy newcomers! This comprehensive kit includes everything you need to get started, from premium commercial-grade, food-safe epoxy resin to essential tools and vibrant colorants. Specially formulated for deep pours, it's perfect for creating stunning wood furniture, river tables, and other unique projects. With easy-to-follow instructions, you'll be able to confidently dive into your first epoxy project, achieving professional results. Whether you're crafting for your home or as gifts, this beginner's kit is your gateway to exploring endless creative possibilities!
This special bundle includes:
Due to DOT regulations, epoxy MUST ship ground. Expedited shipping is not possible.
WiseBond® Deep Pour Epoxy is a best-selling 2" deep single pour epoxy perfect for live-edge river tables, creative table making, wood slabs, wood working, and object art casting projects. It cures to a crystal clear water-like appearance and designed for a long cure to make it easy to work with.
Choose 3 of our 67 unique powdered colorants for amazing special effects adding vibrancy to any river table, encapsulated object, voids, turning projects, custom wood tables or art projects.
WiseBond® Quick Set Seal is a medium viscosity, fast setting epoxy designed to seal live-edge wood slabs and coating porous substrates as used for wood table building. Additionally, it is useful as a quick patching material to fill small cracks, voids and blemishes. This epoxy sets up quickly in about 2-3 hours allowing table builders to keep on track and on schedule building beautiful furniture.
The WiseMix measuring and mixing cups are re-usable, and calibrated for the ideal amount of 1:1 ratio and 2:1 ratio epoxy resin mixing. These cups are perfect for mix ratios by volume.
Be sure you don't run out of epoxy if your project needs it. Order additional Deep Pour Kits or even Bar & Table Top epoxy on our site.
This product is NOT to be poured or used less than 1/2" in thickness.
For a 1/8" glossy, self-leveling finish coat use WiseBond® Bar & Table Top Epoxy.
Only mix WiseBond® Quick Set Seal as much as needed in small batches. This quick setting epoxy has a very short pot life and unused epoxy will begin to overheat within 10-12 minutes when left in mixing containers. Do not allow extra unused epoxy to sit! Pour all unused epoxy onto a scrap piece of wood or piece of cardboard in a thin layer to prevent overheating.
When WiseBond® Deep Pour Epoxy is used in small amounts, the drying time will slow but it will still cure. WiseBond® Deep Pour casting resin is not designed as the final coat. This product is NOT to be used for normal 1/8" flood coat pour.
FOOD SAFETY: Products "WiseBond® Deep Pour 2” Epoxy: Part A and B, and WiseBond® Bar & Table Top Epoxy: Part A and B", are resinous polymeric coatings. These resinous polymeric coatings have been tested by an independent Testing, Inspection and Certification laboratory for conformity to Food and Drug Administration (FDA) standards as required by 21 CFR 175.300 Condition E from Table 2. Epoxy prepared pursuant to product instructions passed the FDA Standard extraction testing under standard conditions of use. The products were found to be in compliance with the US Food and Drug Administration regulation, 21 CFR 175.300, Condition E, for surfaces in contact with food at room temperature. Other conditions of use or variations in preparation or application of the resin would potentially require follow up testing.
The above statement refers to “clear” epoxy only. Adding any type of colorant to either epoxy alters the epoxy formula and it will no longer conform to the USFDA 21 CFR 175.300 tested results.
You may email info@wisebond.com for additional information and testing.
NOTE: WiseBond® Epoxies are 100% solids and VOC-Free. Once epoxy is mixed properly according to the instructions and fully cured for 30 days, it is an inert plastic. It is not antimicrobial. Epoxy is not safe to ingest (liquid or cured). Do not cut on or prepare raw food on epoxy surfaces.
Epoxy can and will melt when exposed to a flame and can catch fire. Always keep away from heat and open flames. When exposed to higher temperatures, a maximum of 120F (50C) should be adhered to at all times.
Part A - CALIFORNIA PROPOSITION 65: WARNING: Chemicals known to cause cancer: None.
Part B - CALIFORNIA PROPOSITION 65: WARNING: Chemicals known to cause cancer: None.
© 2024 - WiseBond®, A product of DeckWise®, The Ipe Clip® Fastener Company