Art & Tumbler Epoxy

In Stock, ready to ship
SALE - $40.74

$33.95

#1 Tumbler Cup and Art Craft Epoxy!

This drink tumbler and art resin formula has the perfect glossy sheen for art projects and top coating craft projects. It has textbook viscosity for beverage tumblers and offers an impeccable hard, durable outer shell.

FOOD SAFE CONTACT EPOXY!



We do not offer samples of our products. Why not?

Due to DOT regulations, epoxy MUST ship ground. Expedited shipping is not possible.

Imagine the beautiful epoxy jewelry rings and pendants to gorgeous wood epoxy teardrop and heart-shaped necklaces. Just think of the holiday gift ideas for family and friends with hand-made pieces of art, charm bracelets, pressed flowers, or inspirational gifts of love encased in epoxy!

DIY EASY

Just combine any amount at the 1:1 ratio, mix thoroughly, and pour! This epoxy is self-levelling for coating flat and smooth surfaces. Use it for casting objects and making 3-dimensional artwork. Beverage tumblers effortlessly coated to enhance and protect the beauty of underlying artwork and smoothly releases from silicone molds for multiple castings.

SAFE

100% solids and VOC-Free. No fumes. No solvents. Non-flammable. Low odor. Safe for indoor use.

BEAUTIFUL

Add colorants, dyes, or powders to add gorgeous effects to your one-of-a-kind epoxy artwork or drink cup. This epoxy is glossy, shiny, durable and increases the allure of anything it’s applied to!

CLARITY

Art & Tumbler Epoxy is formulated to offer the most clarity possible with UV inhibitors.

Epoxy for Art and Tumblers

USES

  • Epoxy earrings, pendants, and bracelet jewelry
  • Epoxy coated drink and beverage tumblers
  • Coat artwork or canvases with epoxy for preservation
  • Custom pen blanks with epoxy and wood or objects
  • Epoxy serving trays and charcuterie boards
  • Epoxy coating over a finished puzzle or painting
  • Mold epoxy coasters, coat memorabilia and photos
  • Flower/plant epoxy encapsulation
  • Add alcohol ink, epoxy mica powders, or color shifting powders
  • Coat acrylic paintings, mosaics, oil paint, watercolors, marker and spray paint

FEATURES

  • Heat Resistance
  • Made in the USA
  • Scratch Resistance
  • High gloss
  • Self-leveling
  • Food Safe Contact Epoxy
  • Maximum U.V Resistance
  • Water Resistant
  • Zero VOC
  • 100% Solids
  • DIY friendly

MEASURE

Always use proper PPE. Pour equal amounts (1:1 ratio by volume) of A and B into a mixing cup. Mix more than you need to ensure to completely cover your work and not come up short

MIX

Stir SLOWLY! Mixing too fast will introduce air bubbles. Stir for at least 3 minutes while scraping the cup sides and bottom. Unmixed A or B material will not cure. Pour mixture into a fresh clean cup and mix 1 more minute to ensure a well-mixed product.

Once you mix the A and B together, you’ll have about 15-20 minutes of pot life time before the resin thickens and cures in the mixing cup. CAUTION! Only mix as much as needed in small batches. Unused epoxy can and will begin to heat up within 10-20 minutes - depending on volume - when left in mixing containers. Do not allow extra unused epoxy to sit! Pour all unused epoxy onto a scrap piece of wood or piece of cardboard in a thin layer to prevent overheating.

POUR

Be sure the project it is level, free of dust/dirt and the room temp is around 72 degrees. The epoxy will self-level and this is when you can spread it, move it or manipulate it. Any bubbles are easily popped with a heat gun.

Once you begin using (pouring or spreading) the mixed epoxy, you’ll have about 30-45 minutes of working time before the resin thickens and begins cures.

CURING

Epoxy needs to cure for 24 hours for its initial cure. Within 8-12 hours it will have a hard tack. This is when you can pour a second layer if so desired. In about 12-18 hours, it will be dry to the touch and can be moved without damage. Do not remove from molds yet. At 24 hours is when it can be handled or removed from a mold. A full cure is in 72 hours and 30 days it will be a full-hard cure.

Clean up the tools you will reuse with acetone or denatured alcohol.

FOOD SAFETY: Products "WiseBond® Deep Pour 2” Epoxy: Part A and B, and WiseBond® Bar & Table Top Epoxy: Part A and B", are resinous polymeric coatings. These resinous polymeric coatings have been tested by an independent Testing, Inspection and Certification laboratory for conformity to Food and Drug Administration (FDA) standards as required by 21 CFR 175.300 Condition E from Table 2. Epoxy prepared pursuant to product instructions passed the FDA Standard extraction testing under standard conditions of use. The products were found to be in compliance with the US Food and Drug Administration regulation, 21 CFR 175.300, Condition E, for surfaces in contact with food at room temperature. Other conditions of use or variations in preparation or application of the resin would potentially require follow up testing.

The above statement refers to “clear” epoxy only. Adding any type of colorant to either epoxy alters the epoxy formula and it will no longer conform to the USFDA 21 CFR 175.300 tested results.

You may email info@wisebond.com for additional information and testing.


NOTE: WiseBond® Epoxies are 100% solids and VOC-Free. Once epoxy is mixed properly according to the instructions and fully cured for 30 days, it is an inert plastic. It is not antimicrobial. Epoxy is not safe to ingest (liquid or cured). Do not cut on or prepare raw food on epoxy surfaces.

Epoxy can and will melt when exposed to a flame and can catch fire. Always keep away from heat and open flames. When exposed to higher temperatures, a maximum of 120F (50C) should be adhered to at all times.

Part A - CALIFORNIA PROPOSITION 65: WARNING: Chemicals known to cause cancer: None.

Part B - CALIFORNIA PROPOSITION 65: WARNING: Chemicals known to cause cancer: None.

 

img

Added to cart successfully!